To view the user guide included in the Crusher™ Wireless packaging, click here.
WALKTHROUGH
CONTROLS
Power On/Off:
Power on:
- Hold main function button down for 3 seconds
- LED will flash purple to indicate powering on
- LED blinking blue indicates device is paired
- LED blinking red indicates device is not paired
Power Off:
- Hold main function button down for 3 seconds
Volume Up & Down:
- Tap “+” or “-” buttons to turn volume up or down
Change Audio Tracks:
- Press and hold “+” to skip forward and “-” to skip back
Take a phone call:
- Answer/End call: Click main function button
- Hold call: Press and hold main function button for 2 seconds
Adjust the Bass:
- Adjust slider up for more bass and down for less
USER GUIDE
TROUBLESHOOTING
HEADPHONES WILL NOT CHARGE
Issue: Not seeing the red LED light on Crusher™ that indicates headphones are charging.
- Wait momentarily after plugging the headphones in, occasionally it takes a few seconds to begin charging.
- Check to see if any debris is inside or otherwise blocking the charging port on the side of the headphones.
- Be sure to charge your headphones on a flat surface to ensure the USB connector on the charging cord is flush and securely inserted into the charging port.
- When charging the device, we recommend using a cable, charger, or outlet with a power output that does not exceed 18-Watt (5 Volts/3.6amps).
If you’ve checked everything above and are still experiencing issues, please visit our warranty page where you can file a claim to receive a replacement. All Skullcandy products have a 1-year warranty.
FAQs
WARRANTY
Does Crusher™ Wireless have a warranty?
Yep! 1 year. For more information, click here.